 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Series PF, PowerFin * Ultra High Steady State Current Rating * Low Leakage (Off- State ) * SCR Output * AC or DC Control * Crydom's Patented Design TM Up to 25Amp * 120/240, 380, 480 Vac * AC Output Crydom's PowerFin series delivers the highest ratings of any single in-line package (SIP). The integral heat sink design can operate at 25 amps RMS in forced air at 85uC case temp. With natural convection in free air, it rates 10 amps RMS at 25uC ambient. TM Built-in advantages include Surface Mount Technology and SCR output. Manufactured in Crydom's ISO 9001 Certified facility for optimum product performance and reliability. MODEL NUMBERS AC CONTROL (120Vac) (24Vac) DC CONTROL PF240A25 PFE240A25 PF240D25 PFE240D25 PF380D25 PFE380D25 PF480D25 PFE480D25 (5Vdc) (24Vdc) OUTPUT SPECIFICATIONS Operating Voltage (47-63 Hz) [Vrms] Load Current Range [Arms] Transient Overvoltage [Vpk] Max. Surge Current, (16.6ms) [Apk] Max. On-State Voltage Drop @ Rated Current [Vpk] Maximum I2 t for Fusing, (8.3 msec.) [A2sec] Max. Off-State Leakage Current @ Rated Voltage [mArms] Min. Off-State dv/dt @ Max. Rated Voltage [V/sec] Max. Turn-On Time Max. Turn-Off Time Power Factor (Min.) with Max. Load 12-280 48-530 Forced Air.06-25 Convection Air .06-10 48-660 600 250 1.6 260 0.1 500 1200 250 1.6 260 0.1 500 1200 250 1.6 260 0.1 500 1/2 Cycle (DC Control), 10.0 msec (AC Control) 1/2 Cycle (DC Control), 40.0 msec (AC Control) 0.5 0.5 0.5 INPUT SPECIFICATIONS Nominal Voltage MODEL NUMBERS PF240D25 Control Voltage Range Max. Turn-On Voltage Min. Turn-Off Voltage Nominal Input Impedance Typical Input Current @ Nominal Voltage DC CONTROL 5Vdc 5Vdc PF380D25 PF480D25 AC CONTROL 24Vdc PFE240D25 PFE380D25 PFE480D25 15-32 Vdc 15.0 Vdc 1.0 Vdc 1500 Ohm 15 mAdc 120Vac 24Vac PF240A25 PFE240A25 3-15 Vdc 3.0 Vdc 1.0 Vdc 300 Ohm 15 mAdc 4-15 Vdc 4.0 Vdc 1.0 Vdc 240 Ohm 15 mAdc 90-140 Vrms 90.0 Vrms 10.0 Vrms 14.1k Ohm 10 mArms 18-36 Vrms 18.0 Vrms 2.0 Vrms 4.2k Ohm 5 mArms GENERAL NOTES (c) 2002 CRYDOM CORP, Specifications subject to change without notice. All parameters at 25C unless otherwise specified. Off-State dv/dt test method per EIA/NARM standard RS-443, paragraph 13.11.1 Heatsink temperature 85uC Maximum. Turn-On Time for Random Turn-On versions 0.1msec (DC Control Models). For recommended applications and more information contact: USA: Sales Support (877) 502-5500 Tech Support (877) 702-7700 FAX (619) 710-8540 Crydom Corp, 2320 Paseo de las Americas, Ste. 201, San Diego, CA 92154 Email: sales@crydom.com WEB SITE: http://www.crydom.com UK: +44 (0)1202 365070 * FAX +44 (0)1202 365090 Crydom International Ltd., 7 Cobham Road, Ferndown Industrial Estate, Ferndown, Dorset BH21 7PE, Email: intsales@crydom.com. GERMANY: +49 (0)180 3000 506 FastFax Document No. 115 SERIES PF Rev. 041902 PAGE 1 OF 2 Series PF, PowerFin GENERAL SPECIFICATIONS TM Up to 25Amp * 120/240, 380, 480 Vac * AC Output Dielectric Strength 50/60Hz Input/Output Insulation Resistance (Min.) @ 500 Vdc Max. Capacitance Input/Output Ambient Operating Temperature Range Ambient Storage Temperature Range M ECHANICAL SPECIFICATIONS Weight: (typical) 4000 Vrms 109 Ohm 8 pF -30 to 80C -30 to 125C .85 oz. (25g) Thermally Conductive Epoxy Encapsulation: AVAILABLE OPTIONS R 1.6 TYP. (38.1) Random Turn-On (AC & DC Control, 240V Only) Phase Controllable (DC Control, 240V Only) Example: PF240A25 R, PFE240D25 R 1.35 MAX. (34.3) .050 (1.3) 4 3 2 1 .300 (7.6) TYP. .72 (18.3) TYP. .900 (22.8) DC CONTROL PIN 1: AC LOAD PIN 2: AC LOAD PIN 3: +DC CONTROL PIN 4: -DC CONTROL .040 (1.0) DIA. 4 PLACES AC CONTROL PIN 1: AC LOAD PIN 2: AC LOAD PIN 3: AC CONTROL PIN 4: AC CONTROL .200 (5.1) .700 (17.8) 1.100 (27.9) 1.70 (43.1) All dimensions are in inches (millimeters) CURRENT DERATING CURVES LOAD CURRENT (AMPS) LOAD CURRENT (AMPS) 0 10 20 30 40 50 60 70 80 10 8 6 4 2 0 25 20 15 10 5 0 0 20 40 60 80 100 120 140 AMBIENT TEMPERATURE (Cu) HEATSINK TEMPERATURE (Cu) Fig.1 Convection Cooling APPROVALS Fig.2 Forced Air Cooling (c)2002 CRYDOM CORP, Specifications subject to change without notice. UL E116950 VDE 70938 (DC Control Only) FastFax Document No. 115 SERIES PF Rev. 041902 PAGE 2 OF 2 For recommended applications and more information contact: USA: Sales Support (877) 502-5500 Tech Support (877) 702-7700 FAX (619) 710-8540 Crydom Corp, 2320 Paseo de las Americas, Ste. 201, San Diego, CA 92154 Email: sales@crydom.com WEB SITE: http://www.crydom.com UK: +44 (0)1202 365070 * FAX +44 (0)1202 365090 Crydom International Ltd., 7 Cobham Road, Ferndown Industrial Estate, Ferndown, Dorset BH21 7PE, Email: intsales@crydom.com. GERMANY: +49 (0)180 3000 506 |
Price & Availability of PF240A25
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |